| Brand New The LITTLE ARM Grapple! This is a brand new add on GRAPPLE ARM Kit attachment, we call it "THE LITTLE ARM". You can easily add to any skid steer, or tractor, or any unit that has aux hydraulics. Construction: This is a super strong reinforced grappling arm. The base has six mounting holes that are ½”. The sides of the arm are made of 3/8” solid plate. The sides are held in place by two square tubes, and one solid bar, the middle tube is a super strong over sized 2 ½ x ¼ “ . The arm is 16" wide! There are two huge supporting triangles to prevent the points from bending. The two tabs that hold the cylinder on are made of solid ¾ “ plate with 1” holes also. You can bolt or weld this arm on your bucket with no problem. Some adapting may be required. All pins are 1". All pins are quick disconnecting. So that if you wish not to have the arm on your bucket, just pull three pins and set the arm off to the side, while the mounting plate is still attached to the bucket. The Cylinder: The new tie rod cylinder is made for working pressures at 2500 p.s.i. The Hoses are not included! Measure from your cutting edge to your top lip on your bucket and if it is 28" or 32” we have your grapple!! They are both the same price. |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |