 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
THE BIG ARM
PICTURES AT BOTTOM OF SCREEN
This is a brand new add on GRAPPLE ARM attachment, we call it
"THE BIG ARM".
Construction:
This is a super strong reinforced grappling arm. The base has six
1/2" mounting holes. The sides of the arm are made of 3/8” solid
plate. The sides are held in place by three square tubes, the
middle tube is a super strong over sized 2 ½ x ¼ “ With support
tab. The arm is 20’ wide for grabbing more!!! At the end of the
“points” there are two huge supporting triangles to prevent the
points from bending. You can bolt or weld this arm on your bucket
with no problem, some adapting may be required.
Also all pins are 1".
All pins are quick disconnect. So that if you wish not to have the
arm on your bucket, just pull three pins and set the arm off to the
side, while the mounting plate is still attached to the bucket.
The Cylinder:
Is a brand new tie-rod cylinder.
The Hoses and connectors are not included!
Opening and closing:
The arm will open 24 ¼” higher than what you mount it on.
Paint:
The pics show a white unit. But this is just a white primer so that
the arm would show up better in the pics. The arm you will receive
will be gloss black.
"THE BIG ARM".
Construction:
This is a super strong reinforced grappling arm. The base has six
1/2" mounting holes. The sides of the arm are made of 3/8” solid
plate. The sides are held in place by three square tubes, the
middle tube is a super strong over sized 2 ½ x ¼ “ With support
tab. The arm is 20’ wide for grabbing more!!! At the end of the
“points” there are two huge supporting triangles to prevent the
points from bending. You can bolt or weld this arm on your bucket
with no problem, some adapting may be required.
Also all pins are 1".
All pins are quick disconnect. So that if you wish not to have the
arm on your bucket, just pull three pins and set the arm off to the
side, while the mounting plate is still attached to the bucket.
The Cylinder:
Is a brand new tie-rod cylinder.
The Hoses and connectors are not included!
Opening and closing:
The arm will open 24 ¼” higher than what you mount it on.
Paint:
The pics show a white unit. But this is just a white primer so that
the arm would show up better in the pics. The arm you will receive
will be gloss black.
